The eDEV-BF5xx Blackfin® Starter Package is a feature rich, low cost rapid development kit designed for rapid prototyping based on Analog Devices high performance dual core embedded processor ADSP-BF561. The starter package consists of the powerful Blackfin® based Core Module eCM-BF561 and the eDEV-BF5xx development board, which provides all interfaces on dedicated connectors and has all Core Module pins routed to solder pads which can be easily accessed by the developers. This allows customers to connect their own hardware and enables comfortable measurements. The eDEV-BF5xx supports the latest debugging interface from Analog Devices and features extender sockets on the bottom side for you own hardware or upcoming extender boards.
Highlights SoM eCM-BF561 included Full featured carrier board included Optimized for parallel digital signal processing TFT connector BLT-Image Sensor Module Connector USB-to-UART Solder Pads
Typische Anwendungen BLACKSheep® OS, uClinux
Robot Navigation, Aerospace and Defense, Security and Alarms Systems , Health Care Equipment and Devices, Test and Measurement , Parallel Digital Signal Processing, Machine Vision, Robotic,
Lieferumfang SoM - eCM-BF561 (100-1214-1) Carrier Board - eDEV-BF5xx DC power cable USB device cable| CPU | |
|---|---|
| CPU | 2 x 600 MHz BF561 |
| General Information | |
| Connector | 2 x 100 pin 0.5 pitch for eCM-BF561 |
| VIN | 24 VDC |
| ISM Support | 1 x |
| Temperature Range | 70 °C |
| Width | 120 mm |
| Height | 120 mm |
| Interfaces | |
| Communication | 1 x ETH (10/100 Mbit/s) , 1 x USB 2.0 , 1 x USB - UART Konverter |
| I/O | 187 x Stiftleiste |
| Memory | 1 x SD-Kartenhalter |
| Video | 1 x BLT ISM , 1 x Parallel Display (40 pin ZIF connector for EDT G- TFT Family Concept) |
ADI USB Emulator-100B
JTAG
SADA II
Touch Screen Controller Image Sensor Modules Support
The eDEV-BF5xx Blackfin® Starter Package is a feature rich, low cost rapid development kit designed for rapid prototyping based on Analog Devices high performance dual core embedded processor ADSP-BF561. The starter package consists of the powerful Blackfin® based Core Module eCM-BF561 and the eDEV-BF5xx development board, which provides all interfaces on dedicated connectors and has all Core Module pins routed to solder pads which can be easily accessed by the developers. This allows customers to connect their own hardware and enables comfortable measurements. The eDEV-BF5xx supports the latest debugging interface from Analog Devices and features extender sockets on the bottom side for you own hardware or upcoming extender boards.
Highlights SoM eCM-BF561 included Full featured carrier board included Optimized for parallel digital signal processing TFT connector BLT-Image Sensor Module Connector USB-to-UART Solder Pads
Typische Anwendungen BLACKSheep® OS, uClinux
Robot Navigation, Aerospace and Defense, Security and Alarms Systems , Health Care Equipment and Devices, Test and Measurement , Parallel Digital Signal Processing, Machine Vision, Robotic,
Lieferumfang SoM - eCM-BF561 (100-1214-1) Carrier Board - eDEV-BF5xx DC power cable USB device cable| CPU | |
|---|---|
| CPU | 2 x 600 MHz BF561 |
| General Information | |
| Connector | 2 x 100 pin 0.5 pitch for eCM-BF561 |
| VIN | 24 VDC |
| ISM Support | 1 x |
| Temperature Range | 70 °C |
| Width | 120 mm |
| Height | 120 mm |
| Interfaces | |
| Communication | 1 x ETH (10/100 Mbit/s) , 1 x USB 2.0 , 1 x USB - UART Konverter |
| I/O | 187 x Stiftleiste |
| Memory | 1 x SD-Kartenhalter |
| Video | 1 x BLT ISM , 1 x Parallel Display (40 pin ZIF connector for EDT G- TFT Family Concept) |
ADI USB Emulator-100B
JTAG
SADA II
Touch Screen Controller Image Sensor Modules Support